4U,
5 Bay, 20 Slot Backplane Case Our industrial 4U 20 slot back plane
rack-mount chassis will support passive back planes with up to
20 slots!. There are two exposed 3 1/2", and one exposed 5 1/4"
drive bays, with two additional hidden 3 1/2" hard drive bays.
Two 12cm fans behind the bays for plenty of air flow. An adjustable
expansion card clamp is built into this sturdy case, to keep adapter
cards in place under shock and vibration. Your choice of 115/230 V AC
power supply are available with UL / CSA / TUV / FCC / CE approvals.
Please see our accessory
page for ball bearing chassis slides and other options.
Included with the chassis is a Temperature Alarm Module with two
temperature probes. If an over temperature condition occurs, or
a fan should fail the module
sounds an alarm, and the mother board fan sensor is triggered.
An alarm reset switch and two LED's are provided behind the access door.
Dimensions: 24.75" (629mm) Deep
16.81" (427mm) Wide
6.97" (177mm) High
CS458 and CS658 are frames that fits in
the 5 1/4" bay and include a slim IDE CD-ROM drive. It has
space below for a second hard drive. This frame will provide
support for a hard drive and CD-ROM in the same bay. The CS458
is beige and the CS658 is black. See
photo here.
MB604 has a total of 19 slots. It is configured
with 13 ISA, 4PCI and 2 PICMG slots for a single board computer or ISA
use. 18 slots will be free after the SBC card is installed. It
is fully PICMG 2.1 Compliant.
MB618 has a total of 19 slots. It
is configured with 10 ISA, 7 PCI and 2 PICMG slots for a single board
computer or ISA use. 18 slots will be free after the SBC card is installed.
It is fully PICMG 2.1 Compliant..
MB619 has a total of 19 slots. It
is configured with 5 ISA, 12 PCI and 2 PICMG slots for a single board
computer or ISA use. 18 slots will be free after the SBC card is installed.
It is fully PICMG 2.1 Compliant..
MB606 has a total of 19 slots. It
is configured with 7 ISA, 10 PCI and 2 PICMG slots for a single board
computer or ISA use. 18 slots will be free after the SBC card is installed.
It is fully PICMG 2.1 Compliant with an active PCI bridge.
MB608 has a total of 19 slots. There
is 18 PCI and 2 PICMG slots for a SBC or ISA use. One PCI and
one PICMG slot is shared. It is fully PICMG 2.1 Compliant
MB607 offers up to two computers in one
case using a segmented backplane . It has a total of 18 slots.
It is designed with 2 segments. Each segment may have a its own
single board computer. Each segment has 3 ISA, 4 PCI and 2 PICMG
slots for a SBC or ISA use. The same power supply
is used for all segments and it is fully PICMG 2.1 Compliant
MB603 offers up to four computers in one
case using a segmented backplane .
It has a total of 20 slots. It is designed with 4 segments.
Each segment may have a its own single board computer. There are
3 PCI and 2 PICMG slots for a SBC or ISA use per segment. In most
cases each segment will have its own local drives and one CD-ROM per chassis
which could be shared across a network to the other segments. The
same power supply is used for all segments and it is fully PICMG 2.1 Compliant
MB668
Pentium 4, 800FSB Socket 478 Single Board Computer:
Designed with Intel's® 865 chipset, the MB668 single board computer supports P4 processors
with Hyper-Threading Technology with bus speeds up to 800MHz. It also supports up to
2GB of dual channel DDR400 SDRAM. The rear I/O features Gigabit ethernet LAN, 2 USB 2.0 ports,
PS/2 keyboard and mouse, and a VGA connector for its onboard Extreme Graphics 2.0.
Additional I/O are available on header connectors. It also has all the standard features for
embedded systems, such as programmable watchdog timer, hardware monitoring, modem-ring-on, and wake-on-LAN.
It also supports M-Systems
DiskOnChip flash disk on a chip.
MB669 Socket LGA 775: This SBC is based on the Intel® Q965 and ICH8 chipset. It supports Intel® Core™2 Duo and Intel® Pentium® D processors with 1066/800/533 MHZ fsb and up to 4GB DDR2 800/667/533 SDRAM on dual 240-pin DIMM socket. The board contains Integrated Intel® Graphics Media Accelerator 3000 with up to 256MB memory shared, dual 10BASE-T/100BASE-TX/1000BASE-T ethernet, one FDD port, one parallel port, six USB ports, two serial ports, and Watchdog Timer.
Intel® Core™2 Duo E6300(1.86 Ghz 2MB cache, Dual Core)
$258.00
CP601
Intel® Core™2 Duo E6400(2.13 GHz 2MB cache, Dual Core)
$282.00
CP602
Intel® Core™2 Duo E6600(2.40 GHz 4MB cache, Dual Core)
$347.00
CP603
Intel® Core™2 Duo E6700(2.66 GHz 4MB cache, Dual Core)
$482.00
DDR2-667/800 Memory
CP253
512mb DDR2-667 RAM Memory Module
$38.00
CP254
1gb DDR2-667 RAM Memory Module
$68.00
CP231
512mb DDR2-800 RAM Memory Module
$39.00
CP232
1gb DDR2-800 RAM Memory Module
$70.00
Western Digital IDE Drives
The main system board built-in IDE controller will support high data transfer
rates. This allows you to take full advantage of these high performance
low cost hard drives.
Our industrial 4U 20 slot back plane
rack-mount chassis will support passive back planes with up to
20 slots!. There are two exposed 3 1/2", and one exposed 5 1/4"
drive bays, with two additional hidden 3 1/2" hard drive bays.
Two 12cm fans behind the bays for plenty of air flow. An adjustable
expansion card clamp is built into this sturdy case, to keep adapter
cards in place under shock and vibration. Your choice of 115/230 V AC
power supply are available with UL / CSA / TUV / FCC / CE approvals.
Please see our accessory
page for ball bearing chassis slides and other options.
The main system board built-in IDE controller will support high data transfer
rates. This allows you to take full advantage of these high performance
low cost hard drives.
