4U
Deep, 12 Bay, 14 Slot, Backplane Case
Our industrial 4U 14 slot back plane deep rack-mount chassis will
support our 14 slot passive back planes. There are 9 exposed 5.25"
and 3 internal 3.50" drive bays. Three 12cm fans behind the
bays for plenty of air flow. An adjustable expansion card clamp is built
into this sturdy case, to keep adapter cards in place under shock and
vibration. Your choice of 115/230 V AC power supply are available with
UL / CSA / TUV / FCC / CE approvals. Please see our accessory
page for ball bearing chassis slides and other options.
Included with the chassis is a Temperature Alarm Module with two
temperature probes. If an over temperature condition occurs, or
a fan should fail the module
sounds an alarm, and the mother board fan sensor is triggered.
An alarm reset switch and two LED's are provided behind the access door.
Back-Plane Style systems require:a
Backplane board, a single board computer card, a CPU, and a cooling fan.
Back-Plane Board: MB600 has a total of 14 slots, 7 ISA slots, 4 PCI slots,
and 3 PICMG slots for a single board computer or ISA use. 13 slots
will be free after the SBC card is installed. It is fully PICMG 2.1
Compliant.
MB602 has a total of 14 slots configured
with 5 ISA, 7 PCI and 2 PICMG slots for a single board computer or ISA use.
13 slots will be free after the SBC card is installed. It is fully
PICMG 2.1 Compliant with an active PCI bridge.
MB616 has a total of 14 slots configured
with 2 ISA, 10 PCI and 2 PICMG slots for a single board computer or ISA
use. 13 slots will be free after the SBC card is installed. It is
fully PICMG 2.1 Compliant with an active PCI bridge.
MB617 has a total of 14 slots configured
with 1 ISA, 12 PCI and 2 PICMG slots for a single board computer or ISA
use.
13 slots will be free after the SBC card is installed. It is fully
PICMG 2.1 Compliant with an active PCI bridge.
GT Part No
Description
Price
Order
MB600
14 Slot Backplane, 7 ISA, 4 PCI, 3 PICMG
$116.00
MB602
14 Slot Backplane, 5 ISA, 7 PCI, 2 PICMG
$216.00
MB616
14 Slot Backplane, 2 ISA, 10 PCI, 2 PICMG
$264.00
MB617
14 Slot Backplane, 1 ISA, 12 PCI, 2 PICMG
$240.00
Intel® Pentium® 4 Single Board Computers
MB668
Pentium 4, 800FSB Socket 478 Single Board Computer:
Designed with Intel's® 865 chipset, the MB668 single board computer supports P4 processors
with Hyper-Threading Technology with bus speeds up to 800MHz. It also supports up to
2GB of dual channel DDR400 SDRAM. The rear I/O features Gigabit ethernet LAN, 2 USB 2.0 ports,
PS/2 keyboard and mouse, and a VGA connector for its onboard Extreme Graphics 2.0.
Additional I/O are available on header connectors. It also has all the standard features for
embedded systems, such as programmable watchdog timer, hardware monitoring, modem-ring-on, and wake-on-LAN.
It also supports M-Systems
DiskOnChip flash disk on a chip.
MB669 Socket LGA 775: This SBC is based on the Intel® Q965 and ICH8 chipset. It supports Intel® Core™2 Duo and Intel® Pentium® D processors with 1066/800/533 MHZ fsb and up to 4GB DDR2 800/667/533 SDRAM on dual 240-pin DIMM socket. The board contains Integrated Intel® Graphics Media Accelerator 3000 with up to 256MB memory shared, dual 10BASE-T/100BASE-TX/1000BASE-T ethernet, one FDD port, one parallel port, six USB ports, two serial ports, and Watchdog Timer.
Intel® Core™2 Duo E6300(1.86 Ghz 2MB cache, Dual Core)
$258.00
CP601
Intel® Core™2 Duo E6400(2.13 GHz 2MB cache, Dual Core)
$282.00
CP602
Intel® Core™2 Duo E6600(2.40 GHz 4MB cache, Dual Core)
$347.00
CP603
Intel® Core™2 Duo E6700(2.66 GHz 4MB cache, Dual Core)
$482.00
DDR2-667/800 Memory
CP253
512mb DDR2-667 RAM Memory Module
$38.00
CP254
1gb DDR2-667 RAM Memory Module
$68.00
CP231
512mb DDR2-800 RAM Memory Module
$39.00
CP232
1gb DDR2-800 RAM Memory Module
$70.00
Western Digital IDE Drives
The main system board built-in IDE controller will support high data transfer
rates. This allows you to take full advantage of these high performance
low cost hard drives.
Our industrial 4U 14 slot back plane deep rack-mount chassis will
support our 14 slot passive back planes. There are 9 exposed 5.25"
and 3 internal 3.50" drive bays. Three 12cm fans behind the
bays for plenty of air flow. An adjustable expansion card clamp is built
into this sturdy case, to keep adapter cards in place under shock and
vibration. Your choice of 115/230 V AC power supply are available with
UL / CSA / TUV / FCC / CE approvals. Please see our accessory
page for ball bearing chassis slides and other options.
The main system board built-in IDE controller will support high data transfer
rates. This allows you to take full advantage of these high performance
low cost hard drives.
